Cars - Plymouth Valiant

Home > Listing Index > Cars > Plymouth Valiant

	Cars - Plymouth Valiant

The Plymouth Valiant was an automobile manufactured by the Plymouth division of Chrysler Corporation in the United States from 1960 to 1976. It was created to give the company an entry in the compact car market which was emerging in the late 1950s. The vehicle was sold in Australia (and other export markets such as the United Kingdom, South Africa and New Zealand) as the Chrysler Valiant with local development up to 1981.

1960

The Valiant appeared in 1960 as its own marque and was advertised as the Valiant by Chrysler Corp. For 1961, it was assigned to Plymouth, while Dodge's 1961 version was called the Lancer. The 1960–1962 Valiant and Lancer rode on a 106.5 in (2705 mm) wheelbase.

The Valiant was less mechanically radical than the competition from General Motors' Chevrolet Corvair, which had an air-cooled rear-mounted engine. It was considered more daring than the also-new Ford Falcon, however. The Falcon was totally conventional, while the Valiant boasted fairly radical styling and a new engine configuration, the famous Slant-6 engine, which had its cylinders inline but canted 30° to one side. This allowed a lower hoodline, a shorter overall engine (the water pump was now mounted alongside instead of up front), and efficient, long-branch individual-runner intake and exhaust manifolds. The 170 in³ engine gained a reputation for durability and dependability, partly due to the fact that the engine design was specifically engineered to support either an aluminum or a cast-iron block. Somewhat more than 50,000 die-cast aluminum versions of the larger 225 in³ version of the engine were produced between late 1961 and early 1963. With a "Hyper-Pak" dealer tuning kit, the Valiants were sigificantly faster and quicker than any of their competitors. Even European imports and V8 models were trounced by the Valiants at NASCAR's inaugral compact stock-car race at Daytona (FL). The eight Valiants entered in this race in 1960 placed 1st through 8th; after a repeat performance in 1961, NASCAR quietly cancelled the series.

The 1960 Valiant was also a Chrysler Engineering exhibition of their leadership in aluminum die-casting. While the aluminum slant-6 engine block wouldn't make it to production until 1961, the 1960 oil pump, water pump, new alternator, intake manifold, automatic transmission case and extension, and a myriad small parts were all made of aluminum.

Chrysler marketed Valiants at both Dodge and Plymouth dealers in Canada from 1960 to 1966 as a stand alone product. The 1960 to 1962 Canadian Valiants were substantially similar to the American-made cars, except the trunklid had a by Chrysler instead of a Plymouth badge. There were minor differences in interior and exterior trim, and the alternator that had made its much-ballyhooed industry debut as standard equipment on the American-market 1960 Valiant remained an extra-cost option in Canada through 1962. A carburetor anti-frost system, engine block heater, battery warmer, electric car interior heater and other cold-climate items were available as factory and/or dealer-installed options, while air conditioning, which was first offered in the US 1961 models, was not made available North of the border until 1966. Some Canadian-made Auto-Lite (now Prestolite) electrical components were used in lieu of the Chrysler-built components installed on American-built cars. Chrysler Canada's Windsor, Ontario plant was also the source for left- and right-hand-drive export Valiants.

1963

The Valiant was totally reskinned for 1963, with a ½ in (12.7 mm) shorter 106 in (2692 mm) wheelbase. The Valiant was successful, and as was the usual Detroit practice, several different models were spun off it. The Dodge Lancer, which had appeared in 1961, was discontinued, and the Valiant's new Dodge counterpart became the Dart
, the name of which was recycled for the A-body platform. With this redesign, and it rode on a longer 111 in (2819 mm) wheelbase. The Plymouth Barracuda
, considered by some to be the first pony car, was built off the Valiant platform in 1964. This generation featured a station wagon version, but this bodystyle was not continued in 1967. Also manufactured for the 1963 through 1966 model years was a five passenger convertible.

For 1963, the Canadian Valiant used the Dodge Dart body with a Valiant front clip. This continued for 1964. For 1965, Chrysler Canada sold both the 106 in (2692 mm) wheelbase Valiant and the 111 in (2819 mm) wheelbase Dart as Valiants, with all using the Dart dashboard. For 1966 the Valiant was based on the Dart. With the coming of the US-Canada auto trade agreement in 1965, Chrysler could ship cars and parts both ways over the border and in 1967 began importing Plymouth Valiants and Dodge Darts from Detroit.

[ Visit the complete Wikipedia entry for Plymouth Valiant ]

This page is based on the copyrighted Wikipedia article Plymouth Valiant; it is used under the GNU Free Documentation License. You may redistribute it, verbatim or modified, providing that you comply with the terms of the GFDL.

Cars - Plymouth Valiant

1960

1963

Searches on eBay

Related searches on eBay